Monday, 12 December 2016

Waterproof Electrical Connectors

Rubber Molded Connector with Integral Gripper is often a waterproof electrical connector especially produced for the sewer and waste water industries. It really is a variation from the regular Rubber Molded waterproof electrical connector range but incorporates a grippable serration enabling for handling and unplugging in slippery and wet conditions. Get far more details about waterproof connector

Rubber Molded Series ordinarily consists of an in-line female neoprene connector mated to a glass reinforced epoxy (XS) bulkhead connector. Many sizes are accessible ranging from single speak to connectors up by means of 12 speak to connectors. Most are readily available with pins and sockets reversed to assist protect against mismating of connectors, which otherwise appear identical. This also enables for socket form contacts inside a connector exactly where there is a possibility of a "power-on" predicament. Many of your bulkhead sort connectors are out there in 316 Stainless Steel, and may also be manufactured of any in the exotic metals. Male in-line connectors round out the series enabling for in-line mated sets not requiring bulkhead penetration. Moreover, the WOC (with out cable) kind connectors allow for field installation within the event that a connector is damaged though at sea and needs replacing, or for extended cable lengths that make cable transportation cost prohibitive.

The time established Rubber Molded Series is one particular of our most inexpensive lines and has been made use of on all sorts of underwater instrumentation which includes: underwater lighting, communications, ROV's, thermistor arrays, hydrophone arrays, and all forms of sonar systems. The contacts are gold plated per ASTM-B-488 along with the series is rated up to 20,000 psi within a mated condition. These connectors possess a longer track record inside the subsea business than any other folks dating back towards the 1950's.

Important Capabilities

•4 connector sizes

•Up to 12 contacts

•Up to 20,000 psi

•Up to 600 VDC (on typical cable)

•Up to 300 amps

•Neoprene, Glass Reinforced Epoxy, Stainless Steel, Delrin® (DuPont trademark for Resin)

•SO cable as normal

•Typical makes use of; Lights, cameras, swimming pool lighting & ROV's

Key Functions

•Easy mate and demate even with wet and contaminated hands

•Small in size


•Ideally suited for the sewer and water treatment industries

•Various sizes offered from single contact as much as 12 contacts

•Available with pins and sockets reversed to avoid mismating


•Max working pressure 20,000psi (mated)

•Temperature rating as much as 60°

•Voltage rating 600 VDC - speak to factory for higher voltage requirements

•Current rating - dependent upon cable requirements


•Sewer inspection

•Underwater lighting



•Thermistor arrays

•Hydrophone arrays

•All kinds of sonar systems

No comments:

Post a Comment